PIC18F4610T-I/ML【PDF 200/234 页】IC MCU FLASH 32KX16 44QFN

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录3878

196页 197页 198页 199页 [200页]201页 202页 203页 204页

PIC18F2X1X/4X1X

DS39636D-page 70

2009 Microchip Technology Inc.

5.3.5

STATUS REGISTER

The STATUS register, shown in Register 5-2, contains

the arithmetic status of the ALU. As with any other SFR,

it can be the operand for any instruction.

If the STATUS register is the destination for an instruc-

tion that affects the Z, DC, C, OV or N bits, the results

of the instruction are not written; instead, the status is

updated according to the instruction performed. There-

fore, the result of an instruction with the STATUS

intended. As an example, CLRF STATUS will set the Z

bit and leave the remaining Status bits unchanged

(‘000u u1uu’).

It is recommended that only BCF, BSF, SWAPF, MOVFF

and MOVWF instructions are used to alter the STATUS

C, DC, OV or N bits in the STATUS register.

For other instructions that do not affect Status bits, see

the instruction set summaries in Table 23-2 and

Table 23-3.

REGISTER 5-2:

STATUS REGISTER

Note:

The C and DC bits operate as the borrow

and digit borrow bits, respectively, in

subtraction.

U-0

R/W-x

—

—N

bit 7

bit 0

bit 7-5

Unimplemented: Read as ‘0’

bit 4

N: Negative bit

This bit is used for signed arithmetic (2’s complement). It indicates whether the result was

negative (ALU MSB = 1).

1 = Result was negative

0 = Result was positive

bit 3

OV: Overflow bit

This bit is used for signed arithmetic (2’s complement). It indicates an overflow of the 7-bit

magnitude which causes the sign bit (bit 7 of the result) to change state.

1 = Overflow occurred for signed arithmetic (in this arithmetic operation)

0 = No overflow occurred

bit 2

Z: Zero bit

1 = The result of an arithmetic or logic operation is zero

0 = The result of an arithmetic or logic operation is not zero

bit 1

DC: Digit carry/borrow bit

For ADDWF, ADDLW, SUBLW and SUBWF instructions:

1 = A carry-out from the 4th low-order bit of the result occurred

0 = No carry-out from the 4th low-order bit of the result

Note:

For borrow, the polarity is reversed. A subtraction is executed by adding the

2’s complement of the second operand. For rotate (RRF, RLF) instructions, this bit

is loaded with either bit 4 or bit 3 of the source register.

bit 0

C: Carry/borrow bit

For ADDWF, ADDLW, SUBLW and SUBWF instructions:

1 = A carry-out from the Most Significant bit of the result occurred

0 = No carry-out from the Most Significant bit of the result occurred

Note:

For borrow, the polarity is reversed. A subtraction is executed by adding the

2’s complement of the second operand. For rotate (RRF, RLF) instructions, this bit

is loaded with either the high or low-order bit of the source register.

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式